Panasonic CPC-EX manual CPC Strap S1

Section 300-Installation Chapter 3. Cabinet Installation

•Before installing the CPC card, determine if the DBS will be used as a KSU or PBX. To use it as a PBX, cut Strap S1 on the CPC. Cutting this strap allows use of pooled trunks as opposed to line appearances.

Figure 3-6. CPC Strap S1

C utS1 forPooled Trunks (PBX O peration)

D o N otC utS1 forLine Appearances (KSU O peration)

S1

C PC -AIIor

C PC -B

•Install cards only in their dedicated slots. The slot type is marked on the cabinet directly above each slot.

DBS-2.3/9.2-300 DBS Manual - Revised April 2000 3-7