Appendix B. CPC-AII/B 8.0 Feature Update | Section 300-Installation |
| |
Operation | The 44-Series EM/24 operates the same as previous models. |
TAPI Support
CPC-AII/B offers full support for the Panasonic Telephony Applications Processing Interface (TAPI). TAPI is a Windows™ application which allows a PC to be connected to a telephone extension and used to control incoming and outgoing calls through that extension. Typical PC applications that might be used with TAPI include Contact Managers and Personal Organizers.
The Panasonic TAPI product (VB-43720) provides the necessary interface between a DBS and a PC-based TAPI application. This product consists of a TAPI Adapter and the Panasonic TAPI Service Provider (SP) software which resides on the PC. The TAPI Adapter provides the physical connection between a PC, a DBS extension, and the DBS itself. Its purpose is to intercept telephone and call control signaling messages from the DBS and telephone extension and then forward a copy of those messages to the Service Provider software on the PC. After interpreting the messages, the Service Provider software passes them on to the TAPI application.
No special programming of the DBS is required for TAPI. For detailed information, see the TAPI Installation Guide, Part Number 575X00201, Section 570.
Key Telephone Installation Notes
Desi Strip Cover
The 44-Series Key Telephones are shipped with a thin green protective film over the Desi strip cover. Be sure to remove this film from both sides of the Desi cover before placing the phone in service.
Key Telephone Wall Mounting Instructions
The following procedures apply to 44-Series Key Telephones only. Please be sure to follow these procedures exactly. Removing the desk stand incorrectly can result in damage to the telephone and/or desk stand.
1.Place the telephone face down on a flat surface.
2.Grasp the top of the desk stand (at the >ABS< label) and pull up the end to 90° vertical (refer to Step 2 in Figure D-16). The stand will click as it releases from the plastic securing latches.
3.Lift the desk stand as shown in Step 3 of Figure D-16.
Page B-14 | DBS Manual - Revised April 2000 | DBS-2.3/9.2-300 |
