Appendix A. EX 1.0 Feature Update | Section |
|
|
Notes | • Serial Port 2 requires a special interface cable. | |||
| • Serial Port 2 can be used for Bus Monitor/Maintenance only. You must | |||
|
| continue to use the backplane port (Serial Port 1) for SMDR. | ||
| • Port selections are made from the Attendant phone as follows: | |||
|
|
|
|
|
|
|
| to set Serial Port 1 for... | and Serial Port 2 for... |
|
| dial #90 | Bus Monitor/Maintenance | no output |
|
|
|
|
|
|
| dial #92 | SMDR | Bus Monitor/Maintenance |
|
|
|
|
|
|
| dial #93 | SMDR/Maintenance | no output |
|
|
|
|
|
• When Serial Port 2 is used (i.e., #92 has been entered), the internal RAI modem cannot be accessed.
Page | DBS Manual - Revised April 2000 |
