Appendix A. EX 1.0 Feature Update | Section |
|
|
Operation
Notes
has been received, pressing the MSG key will perform
•
To Program Voice Mailbox Access Codes into the MSG Key:
Press PROG MSG
The display will reflect “Regist Data”.
To Confirm a Voice Mailbox Access Code Programmed into the Message Key..
Press CONF MSG.
The programmed access code will be displayed.
Operation With Message Waiting Indicator. The Message Waiting Indicator on the phone’s upper right corner will flash whenever a callback message or voice message has been received.
Operation During Call States. The MSG key will work only when the phone is idle, receiving dial tone, or in Directory Mode (via select key).
Operation If Phone Has Both a Callback Message from another Extension and a Voice Message. Messages are accessed in a First In, First Out order. If the callback message was received before the voice message, then pressing the MSG key will activate
Interaction with
Reprogramming the MSG key if Extension Number Digits is changed. If the DBS is reprogrammed to use a different extension numbering plan (i.e., changed from
Page | DBS Manual - Revised April 2000 |