Panasonic CPC-EX manual Processor Description, Feature CPC/SCC Requirements

Section 300-Installation Chapter 2. System Overview

Figure 2-3. Slot labels for printed circuit packages

Slot Labels (D BS 96)

TRK1 TRK2 TRK3 EC1 EC2 EC3 EC4 EC5 EC6 EC7 EC8 EC/TRK SCC CPC AUX1 AUX2

Processor Description

DBS call-processing is controlled by the Call Processor Card (CPC). Four CPC models are available: CPC-A, CPC-B, CPC-AII, and CPC-EX. For a complete list of hardware enhancements available with the CPC-B,CPC-AII, and CPC-EX, please see Appendix A and Appendix B, located in the back of this manual. See the Appendix in Section 700 - Feature Operation for a complete list of feature enhancements associated with each of these CPCs.

In most cases, the features provided with the DBS depend on the model and software version of the CPC. However, the availability of some features also depends on the model and version of the Service Circuit Card (SCC).

The following table shows some of the major differences between CPC/SCC features. Other differences are noted throughout this manual when they apply to specific installation instructions. For more details on the features provided with each processor, see Feature Operation, Section 700.

Table 2-4. CPC/SCC features

Feature	CPC/SCC Requirements
Double cabinet system	CPC-B, Version 1.0 or greater plus SCC-B
DID	CPC-B, Version 2.0 or greater plus SCC-B,
	Version 1.2 or greater
T1 Interface	CPC-B, Version 4.0 or greater plus SCC-B.
	(The CPC-B must have BPU 1.3 or later. The
	SCC-B ROM 1.3 or later is required if the CO
	does not provide dial tone.)

DBS-2.3/9.2-300 DBS Manual - Revised April 2000 2-9