Panasonic CPC-EX manual Trunk Assignments for Double-Cabinet Systems, System Size Master Slave

	Section 300-Installation			Chapter 4. Trunks and Lines
Table 4-11. T1 and analog trunk assignments, DBS 96
		Trunk	24-Channel T1	Fractional T1	Fractional T1
		Number		using 16	using 8 Channels
				Channels
		1	Analog trunk 1	Analog trunk 1	Analog trunk 1
		↓	↓	↓	↓
		8	Analog trunk 8	Analog trunk 8	Analog trunk 8
		9	T1 channel 24	Analog trunk 9	Analog trunk 9
		↓	↓	↓	↓
		16	T1 channel 17	Analog trunk 16	Analog trunk 16
		17	T1 channel 16	T1 channel 16	Analog trunk 17
		↓	↓	↓	↓
		24	T1 channel 9	T1 channel 9	Analog trunk 24
		25	T1 channel 8	T1 channel 8	T1 channel 8
		↓	↓	↓	↓
		32	T1 channel 1	T1 channel 1	T1 channel 1

Trunk Assignments for Double-Cabinet Systems

•When T1 is used in a double-cabinet system, the number of T1 channels that can be assigned in each cabinet depends on the master/slave designation.

The following table shows the maximum number of T1 channels that can be assigned in two-cabinet systems.

Table 4-12. Maximum T1 assignments for two-cabinet systems

System Size	Master	Slave
DBS 40 + DBS 40	8 analog trunks	16 T1 trunks
DBS 72 + DBS 72	16 analog trunks	24 T1 trunks
DBS 96 + DBS 40	24 T1 trunks	16 T1 trunks
	8 analog trunks
DBS 96 + DBS 72	24 T1 trunks	24 T1 trunks
	8 analog trunks
DBS 96 + DBS 96	24 T1 trunks	24 T1 trunks
	8 analog trunks	8 analog trunks

•Two-cabinet systems use the same trunk numbering scheme as single- cabinet systems. Analog trunks are numbered from “1” upward; T1 trunk channels are numbered downward from the highest channel used.

DBS-2.3/9.2-300 DBS Manual - Revised April 2000 4-15