Section 300-Installation | Chapter 5. Peripheral Equipment |
| |
Door Box Adaptor (Extension Port)
Note: There are two types of door phone adaptors available for the DBS. The first type (VB-43701) utilizes a trunk connection to connect to the door box. See “Door Box Adaptor (Trunk Port)” on page 5-27for more information.
The second type (VB-43711) utilizes a digital port extension to connect to the door box and door opener and is described below.
Guidelines
•The Door Box Adaptor (VB-43711) requires a door opener. In addition, a Door Box (door phone) (VA-43705) is normally used with the Door Box Adaptor. The door opener is not sold by Panasonic; it can be purchased separately from an electronics dealer.
•Each Door Box and opener use one extension port.
Installation
1.Remove the cover from the Door Box Adaptor.
2.Remove the cable punch-out plate (Figure 5-17)in order to make an opening for the cables coming into the Door Box Adaptor. To remove the plate, cut the grooves on either side with diagonal cutters. Then bend the plate back and forth with needle-nose pliers to remove it.
Figure 5-17. Cable punch-out plate, Door Box Adaptor
3.Mount the Door Box Adaptor on the wall using the three screws provided with the unit.
DBS-2.3/9.2-300 | DBS Manual - Revised April 2000 | 5-31 |
