Panasonic CPC-EX manual Installation, Strap 3, MFR card

Chapter 6. Double-Cabinet Systems Section 300-Installation

Installation

1.Install the trunk and extension cards according to the layouts shown in the Figures 6-1through 6-6.

Note: The port numbers for each slot are fixed.

2. If you are using two MFR cards, cut Strap S3 on the second card.

Figure 6-7. Strap 3, MFR card

	S3
M FR	C ard

3.Using the cables provided, connect the CBL-M card in the master cabinet to the CBL-S card installed in the slave cabinet.

Note: The EMI filter must be installed as close to the cabinet as possible, as shown in Figure 6-8 on page 6-11.

6-10 DBS Manual - Revised April 2000 DBS-2.3/9.2-300