Panasonic CPC-EX manual Single Line Telephone Adaptor, Mount the Slta to the wall see Figure

Chapter 5. Peripheral Equipment Section 300-Installation

Single Line Telephone Adaptor

Guidelines

•The Single Line Telephone Adaptor (SLTA, VB-43709) provides an alternative way of connecting analog DTMF telephones (2500 sets). One SLTA supports up to 4 Single Line Telephones.

•Each SLT extension requires a digital extension port connection to the SLTA.

Installation

1.Remove the cover from the SLTA.

2.Remove the cable punch-out plate (Figure 5-20)to make an opening for the cables coming into the SLTA.

To remove the plate, cut the grooves on either side with diagonal cutters.

Then bend the plate back and forth with needle-nose pliers to remove it.

Figure 5-20. Cable punch-out plate, SLTA

3.Mount the SLTA to the wall (see Figure 5-21).

Note: Table 5-11shows the maximum distance the SLTA can be located from the DBS.

5-34 DBS Manual - Revised April 2000 DBS-2.3/9.2-300