Paradyne 8546, 8540 manual MCC IP Router Screens, Routing Table Screen

Monitoring the HotWire DSLAM

MCC IP Router Screens

Use the system information submenu of the IP Router screens to display read-only system information.

"Procedure

To view routing and ARP tables:

1.Follow this menu sequence: Monitoring → IP Router (B-E)

2.The IP Router menu appears. Select the submenu option as shown in Table 7-5 and press Return.

Table 7-5. IP Router Menu Options (1 of 3)

Routing Table B-E-A

Displays information and statistics stored in the routing table. Note that routes will appear only for interfaces that are up. The information and statistics are listed by route and destination number.

To display information for a specific destination, enter the destination IP address at the [Destination # or <RET>]: prompt.

The Routing Table displays the following columns of information:

Routing Table Screen

#± Displays the entry number in the routing table. Use this number to specify which entry you want to display more information.

Destination ± Specifies the destination (or source) IP address of the packet.

Subnet Mask ± Indicates the associated subnet mask for the specified destination IP address.

Routes ± Number of routes for Destination.

Flags ± Identifies the type of route: host, sub (subnetwork), or net (network).

7-12 November 1997 8000-A2-GB20-20