Paradyne 8540, 8546 manual Configuring Dhcp Relay Agent dynamic addressing

Configuring the HotWire DSLAM

Configuring DHCP Relay Agent (dynamic addressing)

Use this procedure to provide dynamic Service Domain IP address allocation to the end-user systems attached to the DSL RTUs.

"Procedure

To configure relay agent:

1.Make certain that the Gateway address used in relaying DHCP requests is configured as an e1a address (A-C-B).

2.Select Configuration → DHCP Relay → Domain Names (A-G-A).

3.Enter values for the following field and press Return after each entry:

Field	Description	Input
Domain Names	ISP domain names.	32 maximum characters.

NOTE:

Unless your client supports the domain names field, you will not be able to have service selection. By default, each port can be assigned one service provider.

The Interface IP address is read only and is required to key in the corresponding domain name.

4.Select Configuration → DHCP Relay → Servers 1±8 or 9±16 (A-G-Bor C).

5.Enter values for the following field and press Return after each entry:

Field

Description

Input

DHCP Server	DHCP server IP address.	nnn.nnn.nnn.nnn format.
Authen Server (optional)	Authentication server IP	nnn.nnn.nnn.nnn format.
	address for this domain.
RADIUS Secret	RADIUS encryption value.	Up to 16 numeric
(optional)		characters.
Authen Type	Type of authentication you	N = none (No
	want performed.	authentication to be
		performed.)
		R = RADIUS (Forward a
		message to a RADIUS
		server.)
		T = XTACACS (Forward a
		message to a XTACACS
		server.)
Authentication Wait TIme	Authentication time out.	Default = 5 seconds.
(optional)
Number of Authentication	Authentication attempts.	Default = 2 seconds.
attempts
Dynamic access control	Security control flag.	E = Enable
security		D = Disable.
Port (1±4) Default DHCP	Which domain's DHCP	0 = no default.
Domain Index	service will be used.

8000-A2-GB20-20 November 1997 4-17