Paradyne 8540, 8546 manual Configuring a Static Route to an NMS on each DSL Card

Configuring the HotWire DSLAM

Configuring a Static Route to an NMS on each DSL Card

Use this procedure to enable the management traffic from the 8546 DSL cards or 5446 RTUs to be routed back through the MCC.

"Procedure

To configure a static route to an NMS on each DSL card:

1.Select Configuration → IP Router → Static_Routes (A-E-A).

2.Press Return on the Item 0 field to add a new record.

3.Enter values for the following fields and press Return after each entry:

Field	Description	Input
Host/Net	Destination of the route to	0.0.0.0 to indicate the
	the NMS.	default route
Subnet Mask	Associated subnet mask	nnn.nnn.nnn.nnn format
	for the specified
	destination IP address to
	the NMS.
Next Hop	IP address of the next hop	nnn.nnn.nnn.nnn format
	device for the specified
	destination to the NMS.

Pref (Preference)

Measure of how preferable one route is to another, if you have two routes going to the same destination. (The lower the number, the more preferable the route.) This route is compared to other routes for the same destination address.

1

4.Confirm the save and press Ctrl-z to return to the Configuration → IP Router menu.

8000-A2-GB20-20 November 1997 4-13