HotWire Menus and Screens

Accessing the HotWire ± DSL Menu and Selecting a Specific DSL Card

"Procedure

To access the HotWire ± DSL menu:

1.From the HotWire Chassis Main Menu, select Card Selection. The Card Selection screen appears.

2.Verify that the DSL card you want to access appears on the Card Selection screen. (See Card Selection Screen on page 2-14 for more information.)

3.At the Goto Card (MCC or DSLnn): prompt, enter DSL and the number of the slot. Then, press Return. For example, if you want to configure the DSL card in Slot 13, enter DSL13 or 13.

The HotWire ± DSL menu appears.

Exiting From the System

You can manually log out of the system or, after five minutes of inactivity, the system will automatically log you out.

Manually Logging Off

"Procedure

To exit from the HotWire DSLAM system:

1.Return to the HotWire Chassis Main Menu by selecting Exit from either the HotWire ± MCC menu or the HotWire ± DSL menu.

The HotWire Chassis Main Menu appears.

2.From the HotWire Chassis Main Menu, select Logout.

The system exits from the current login session on the HotWire DSLAM.

Automatically Logging Off

The DSLAM system has an automatic timeout feature that logs you out of the system after five minutes of inactivity. You will need to log back in to continue your work.

To log back in, press Return to display the Operator Login screen and log in.

2-16

November 1997

8000-A2-GB20-20

Page 32
Image 32
Paradyne 8546, 8540 manual Exiting From the System, Manually Logging Off, Automatically Logging Off