Paradyne 8546, 8540 manual Assigning IP Addresses to the DSL Cards on the MCC Card

Configuring the HotWire DSLAM

Assigning IP Addresses to the DSL Cards on the MCC Card

Use this procedure to define addresses within the management domain. These are automatically assigned to the DSL cards when they are inserted in the chassis.

"Procedure

To assign IP addresses to the DSL cards:

1.Select Configuration → DSL Cards → Set IP Address (A-G-A).

2.Enter values for the following fields and press Return after each entry:

Field	Description	Input
DSL Card Subnet Mask	Subnet mask for the	nnn.nnn.nnn.nnn
	backplane(s1b)	format
	management subnet.
IP Address (for each DSL card)	Management domain	nnn.nnn.nnn.nnn
	IP address for each	format. (Subnet is
	DSL card in the	predetermined ± you
	system.	can enter the host
		number.)

NOTE:

You must have assigned IP addresses to the backplane on the IP

Network screen for s1b before performing this procedure.

3. Press Ctrl-z to return to the Configuration → DSL Cards menu.

4-8 November 1997 8000-A2-GB20-20