Checklist for Setting Up SNMP
Features
B
Setting Up SNMP Features
Use the following checklist when setting up SNMP features.
MCC SNMP Community Strings and Authentication Failure Trap
From the MCC Main Menu, select Configuration → SNMP → Communities/Traps
-Enter Read Only community string name(s).
-Enter Read Write community string name(s).
-If desired, enable the Authentication Failure Trap.
-Enter the IP address of addresses of the NMS.
Management System Source Validation for MCC
While optional, it is recommended, for additional security, that source validation is enabled.
From the MCC Main Menu, select Configuration → SNMP → Security
-Enable IP address security validation.
-Enter the IP address of up to five NMS managers that will be permitted access to the MCC card.
-Enter access permission to be granted to each NMS system (ReadOnly(ro)/Read/Write(rw)/NoAccess(na)).
November 1997 |
