Paradyne 8540, 8546 manual Reboot Card MCC, DSL User Accounts

Checklist for Setting Up User Accounts on the MCC and DSL Cards

Reboot Card (MCC)

Use the following checklist to reboot MCC card after changes have been made.

From the MCC Main Menu, select Configuration → Card Status → Card Reset (A-A-F).

-Enter Y at the yes/no prompt.

-At the initial screen display after reboot, press Return.

To verify that a DSLAM system account has been setup, at the prompt:

-Enter Operator ID.

-Enter Operator Password.

The HotWire Chassis Main Menu is displayed.

DSL User Accounts

Use the following checklist when configuring DSL user accounts (if telneting directly to the DSL card).

From the DSL Main Menu, select Configuration → Users → Accounts (A-D-A).

-Enter the login name (up to 15 characters). This field is case sensitive.

-Enter the password for this account (up to 15 characters). This field is case sensitive.

-Re-enter the password.

-Enter the privilege level (operator for read-only access, administrator for read/write access).

-Enter Y to save changes and Ctrl-z to return to the HotWire Chassis Main Menu tree.

A-2 November 1997 8000-A2-GB20-20