Paradyne 8540, 8546 manual Additional Setup Instructions

Initial Setup Instructions

3.Do one of the following at the (nnn.nnn.nnn.nnn): prompt:

ÐTo accept the subnet mask, press Return.

ÐTo enter a different subnet mask, enter a new subnet mask and press Return.

The system highlights the OK to restart?: prompt.

4.Type y at the yes/no: prompt to restart the card or n to decline the restart.

If you type y, the card restarts. The system displays the HotWire Chassis Main Menu.

NOTE:

At this point, the MCC card can accept a Telnet session to be used for remote configuration.

Additional Setup Instructions

This section describes additional setup instructions you should perform. On the Chassis Information screen, you can enter pertinent chassis information, such as the chassis name, name of person responsible for the system, and physical location of the chassis.

8000-A2-GB20-20 November 1997 3-3