![](/images/new-backgrounds/1170692/170692305x1.webp)
5446 RTU Setup
Table
Object | Description | Setting/Contents |
|
|
|
ipInjectionType | Type of address for each entry. | H null(1) ± Use to add a row. Factory defaults: |
(ipInjectionEntry 1) | Changing the NAP IP address | ± Address: 0.0.0.0 |
| ||
| ± Mask: 255.255.255.255 | |
| resets the database and an | |
| entry of serviceProvider(3) or | ± Status: static |
| host(4) is cleared. | |
| H nap(2) ± Network Access Provider IP entry. Cannot be | |
|
| |
|
| added, modified, or deleted from SNMP. |
|
| H serviceProvider(3) ± Network Service Provider IP |
|
| entry. |
|
| H host(4) ± Host IP entry. |
|
|
|
ipInjectionAddress | IP address information. | IP address for service domain ID, and NAP IP address: |
(ipInjectionEntry 2) |
| H nnn.255.255.255 ± Range for the first byte nnn is 001 |
|
| |
|
| to 223, with the exception of 127. Range for the |
|
| remaining three bytes is 000 to 255. |
|
| IP address for Host Route: |
|
| H nnn.255.255.255 ± Range for the first byte nnn is 001 |
|
| to 239, with the exception of 127. Range for the |
|
| remaining three bytes is 000 to 255. |
|
|
|
ipInjectionMask | Subnet mask. | Subnet mask cannot be 0.0.0.0. |
(ipInjectionEntry 3) |
|
|
|
|
|
ipInjectionStatus | Status of each entry. | Specify address status. When the RTU is reset, the static |
(ipInjectionEntry 4) |
| addresses are saved and dynamic addresses are not |
|
| saved. Default is static(1). |
|
| H static(1) ± Static addresses are assigned for the |
|
| duration of the service subscription. |
|
| H dynamic(2) ± Dynamic addresses are only assigned |
|
| for the duration of the application session. |
|
| H invalid(3) ± Used to delete an entry from the table. |
|
|
|
Additional pdn-common MIBs Supported
The RTU also supports the following
HDevice Status Group,
HDevice Traps Manager Group,
HDevice Control Group,
November 1997 |