Initial Setup Instructions

Chassis Information Screen

"Procedure

1.Choose Chassis Info from the HotWire Chassis Main Menu to enter or display chassis configuration information.

The following table describes the information you should enter on the Chassis Information screen. This information is used in the general section of the SNMP MIB II.

Field

Input

Description

 

 

 

Chassis Name

16 alphanumeric characters

Name for the equipment

 

 

 

Chassis Contact

32 alphanumeric characters

Name and phone number of

 

 

individual responsible for the

 

 

equipment

 

 

 

Chassis Location

16 alphanumeric characters

Physical location of the

 

 

equipment

 

 

 

Bay Number

16 alphanumeric characters

Floor and/or bay number of the

 

 

equipment

 

 

 

Chassis Number

16 alphanumeric characters

Chassis serial number (located

 

 

on the lower right side of

 

 

chassis)

 

 

 

2.When you have made the appropriate changes to the screen, a message

Configuration has been modified. Save (yes/no)? appears. Enter yes to save changes and press Return to go back to the HotWire Chassis Main Menu.

What's Next?

Now you are ready to configure your HotWire DSLAM. Refer to Chapter 4, Configuring the HotWire DSLAM, for instructions on how to configure the mandatory minimum configurations, and Chapter 5, MCC Card Configuration, and Chapter 6, DSL Card Configuration, for additional configuration instructions when customizing your application.

After you have configured your system, you can monitor and troubleshoot potential problems on the system. Refer to Chapter 7, Monitoring the HotWire DSLAM, and Chapter 8, Diagnostics and Troubleshooting, for more information.

3-4

November 1997

8000-A2-GB20-20

Page 36
Image 36
Paradyne 8546, 8540 manual Whats Next?, Chassis Information Screen, Field Input Description