MCC Card Configuration
5-13
8000-A2-GB20-20 November 1997

Table 5-5. SNMP Menu Options (2 of 2)

Communities/Traps (SNMP Communities/Traps) A-F-D
Gives the user the ability to enable the Authentication Failure Trap Mechanism, stores
SNMP Community string names for the DSL card, and stores NMS host IP addresses to
which the DSLAM sends trap messages.
It also lets the user configure four communities with three trap destinations each. This
can be for a total of up to 12 destinations.
Authentication Failure Trap – Enable to send a trap when a SNMP request community
string does not match or when the password for a Telnet session is incorrect.
Community Name – 32 characters, up to four unique entries per screen. Default
names are public (ro), mcc (rw), nms (rw), nms-2 (ro).
Access – ReadOnly(ro)/ReadWrite(rw)/NoAccess(na), up to four entries per screen.
IP Address –
nnn.nnn.nnn.nnn
format. Enter NMS system host address.
Input Number (port) –
nnn
format. Enter NMS system port number.
Send Traps – Set to E to Enable traps to be sent to this address. Set to D to disable.