Paradyne 8546, 8540 manual Management System Source Validation for DSL cards, Enable DSL Port Traps

Checklist for Setting Up SNMP Features

Management System Source Validation for DSL cards

From the DSL Main Menu, select Configuration → SNMP → Security (A-F-A).

-Enable IP address security validation.

-Enter the IP addresses of up to five NMS managers that will permitted access to this DSL card.

Each card does not have to have the same set of managers as any other card or as the MCC.

-Enter access permission to be granted each NMS system (ReadOnly(ro)/Read/Write(rw)/NoAccess(na)).

DSL SNMP Community Strings and Authentication Failure Trap

From the DSL Main Menu, select Configuration → SNMP→ Communities/Traps (A-F-C).

-Enter Read Only community string name(s).

-Enter Read/Write community string name(s).

-If desired, enable the Authentication Failure trap.

Enable DSL Port Traps

From the DSL Main Menu, select Configuration → Ports → DSL Ports (A-B-B).

-Select a DSL port.

-If desired, enter a value for the Margin Threshold.

-If desired, enter a value for the Link Down Count Threshold.

-If desired, enter a value for the Error Rate (minute) Threshold.

-If desired, enter a value for the Error Rate (hour) Threshold.

-Reset the port (A-C-C).

Enable/Disable Endpoint Security to 5446 RTU

From the DSL Main Menu, select Configuration → SNMP→ Security (A-F-A).

-Select an endpoint cookie.

-Enable/Disable endpoint security for the specified port.

B-2 November 1997 8000-A2-GB20-20