MIB Browser Techniques, IP Injection MIB OID | Paradyne 8546, 8540

5446 RTU Setup

Windows 95 syntax example:

HNMS = 135.90.51.1

HMCC card = 135.90.51.220 on the same subnet as the NMS 130.90.51

HDSL card = 135.90.52.10 on subnet 135.90.52

H5446 RTU = 135.90.52.12 on the same subnet as the DSL card 135.90.52

Windows 95 route statement for the NMS at 135.90.51.1:

route add 135.90.52.10 135.90.51.220

route add 135.90.52.12 135.90.51.220

MIB Browser Techniques

There are two MIB browser techniques. The Enterprise MIB allows the use of a null entry or a table index. Use a MIB browser to access the ipInjectionTable. Refer to the Assigning IP Addresses to the DSL Card LAN section in Chapter 4, for additional IP address information.

The Enterprise IP Injection MIB OID (Object ID) is 1.3.6.1.4.1.1795.2.24.2.11.

IP Injection MIB OID

iso (1) org (3) dod (6) internet (1)

mgmt (2) experimental (3)

mib-2 (1)

thenewpdn-products (1)

private (4)

enterprises (1)

thenewpdn (1795)

thenewpdn-mgmt (2)

paradyne (24)

pdn-common (2)

pdn-ipinjection (11)

97-15568

8000-A2-GB20-20

November 1997

F-3

Image 150

Paradyne 8546, 8540 manual MIB Browser Techniques, IP Injection MIB OID

Contents

Hotwire Dslam for 8540 and 8546 DSL Cards Copyright 1997 Paradyne Corporation All rights reserved Contents Initial Setup Instructions DSL Card Configuration Diagnostics and Troubleshooting Static Route Warning Messages Glossary Index About This Guide Document Purpose and Intended Audience Document Summary Section Description Product-Related Documents Section Description HotWire Dslam System Description What is the HotWire DSLAM? HotWire Dslam Components Network Service Provider Central Office COCustomer Premises CP One Management Communications Controller MCC card Features Levels of AccessHotWire Dslam Software Functionality Configuring the System Monitoring the System Troubleshooting and Diagnostics HotWire Menus and Screens Overview Components of a HotWire Menu Menu and Screen Formats Components of a HotWire Screen HotWire 8800 MCC 8000 Commonly Used Navigation Keys Keys Definition HotWire Menus a Hierarchical View HotWire Chassis Main Menu Diagnostics HotWire ± MCC MenuHotWire-MCC Applications Card Status ConfigurationPorts Users Interfaces Monitoring Physical LayerNetwork Protocol HotWire ± DSL Menu Ports IP Router Dhcp Relay Card/CPE Status PPP Stats Reviewing the Levels of Access Operator Login Screen Card Selection Screen Position Display Description Accessing the HotWire ± MCC Menu Procedure Exiting From the System Manually Logging OffAutomatically Logging Off Initial Setup Instructions Accessing the System for the First Time Initial Setup Instructions Additional Setup Instructions Whats Next? Chassis Information ScreenField Input Description Configuring the HotWire Dslam Port Naming Convention Configuring MCC Cards, DSL Cards, and RTUs For the Management Domain See Perform task For each Service Domain See Perform task MCC Card DCE ManagerServer 10BT DCE Manager Router DSL Card Service Domain ISP Router Setting Time and Date Screen Field Description Input Assigning IP Addresses to the Backplane on the MCC Card Net Assigning IP Addresses to the DSL Cards on the MCC Card Select Configuration → Snmp → Communities/Traps A-F-D Creating the Default Route Select Configuration → IP Router→ StaticRoutes A-E-A Resetting the MCC Card Selecting a DSL Card to Configure Configuring 5446 RTU IP Host Addresses on the 8546 DSL Card Host Configuring a Static Route to an NMS on each DSL Card Select Configuration → IP Router → StaticRoutes A-E-A Assigning IP Addresses to the DSL Card LAN Resetting the DSL Card Configuring Static Routes to End Users on each DSL Card Configuring Dhcp Relay Agent dynamic addressing Creating Default Route or Source Route on the DSL MCC Card Configuration MCC Configuration Card Status Screens DNS Setup Configure DNS Card Status Menu Options 1Card Info System Information Card Status Menu Options 2 Download Code Download Code and Apply Download Card Reset Reset SystemCard Status Menu Options 3 Apply Download Interfaces Menu Options 1 MCC Configuration Ports Screens Reserved for Future UseMCC Configuration Interfaces Screens General Interfaces Base Subnet Mask ± nnn.nnn.nnn.nnn format Interfaces Menu Options 2IP Network Input Filter ± Optional Output Filter ± Optional MCC Configuration Users Screens Users Configure AccountUsers Menu Options Static Routes MCC Configuration IP Router ScreensIP Router Menu Options 1 Martian Networks IP Router Menu Options 2 Filter Table IP Router Menu Options 3 IP Router Filters IP Filter ConfigurationDelete Rule ± Yes/No Go to Rule Number ± Default = Destination Address ± nnn.nnn.nnn.nnn format IP Address/Host Name ± nnn.nnn.nnn.nnn format IP Router Menu Options 4Parameters a Delete Entry Delete ARP Entry C Security Snmp Security MCC Configuration Snmp ScreensSnmp Menu Options 1 Logical Entities Snmp Logical Entities Snmp Menu Options 2 Communities/Traps Snmp Communities/Traps MCC DSL Cards Screen DSL Options DSL Card Configuration DSL Configuration Card Status Screens Card Status Options 1 Card Status Options 2 Card Status Options 3 Card Status Menu Options 4 Ethernet Port DSL Configuration Ports ScreensPorts Options 1 DSL Ports DSL Parameters Ports Options 2 DSL Configuration Interfaces Screens Interfaces Options 1 Interfaces Options 2 Negotiate Options Echo Policy Default =Interfaces Options 3 Link Options DSL Configuration Users Screens Users Options DSL Configuration IP Router Screens IP Router Options 1 IP Router Options 2 IP Router Options 3 Delete Rule ± Yes/No Go to Next Rule ± Yes/No IP Router Options 4 Delete ARP Entry Delete ARP EntryC DSL Configuration Snmp Screens Snmp Options 1 Snmp Options 2 DSL Configuration Dhcp Relay Screens Servers 1±8 and Servers 9±16 B or C Dhcp Relay OptionsDomain Names Servers 1±8 B DSL Configuration RTU Screens RTU InformationRTU Information Monitoring the HotWire Dslam MCC Monitoring Menu Tree Login History MCC Monitoring Card Status ScreensCard Info General Card Information Syslog MCC Monitoring Physical Layer ScreensPhysical Layer Options 1 Active List Active Ports List Physical Layer Options 2 Ether Statistics Ethernet StatisticsHdlc Bus Stats Hdlc Bus Statistics Active List Active Interfaces List MCC Monitoring Interfaces ScreensInterfaces Options Status Interface Status MCC Network Protocol Screens Network Protocol Options 1Socket Statistics Network Protocol Options 2 UDP Statistics Network Protocol Options 3 TCP Data Stats TCP Statistics Network Protocol Options 4 TCP Connection StatisticsIP Statistics Network Protocol Options 5 Icmp Statistics Icmp Packet StatisticsSnmp Statistics Snmp Authentication Statistics Network Protocol Options 6Hdlc Stats Hdlc Statistics MCC IP Router Screens Routing TableRouting Table Screen Routing Information Window ARP Table DSL Monitoring Menu Tree DSL Monitoring Card Status Screens Card Status Options DSL Monitoring Physical Layer Screens Physical Layer Options 2 Physical Layer Options 3 Physical Layer Options 4 DSL Link Perf DSL Link Performance SummaryDSL Perf Stats DSL Performance Stats DSL Error Stats Physical Layer Options 5DSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens DSL Network Protocol Screens Network Protocol Options 2 TCP Data Stats TCP Data Statistics Network Protocol Options 4 Network Protocol Options 5 Hdlc Statistics Hdlc Statistics LCP Stats PPP H B Network Protocol Options 7PPP Stats General H a Ipcp General Stats PPP H C DSL IP Router Screens 10. IP Router Options 1 10. IP Router Options 2 Routing Table Routing Information Window 10. IP Router Options 3 11. RTU Information Diagnostics and Troubleshooting Applications Screens TraceRoute Applications OptionsPing MCC and DSL Telnet MCC Card only Diagnostic Screens Selftest Diagnostics OptionsAlarms Card Alarms Packet Echo Test Troubleshooting Model # M R D U X X Checking Alarms Major Alarms 1 Failure Type Action Major Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the Dslam Minor Alarms 1 Failure Type Action MarginThreshold Error Rate Failure Type ActionLink Down Network Problems Slow Performance Excessive Collisions No Snmp Connection Established Filters Not Working IP Routing Problems No PPP TrafficNo Response at Start Up System Does Not Recognize New DSL Cards Large Number of TrapsCannot Communicate with Interface Cannot Upload Configurations to a Unix Server Unexpected Subnet DataCannot Communicate with 5446 RTU from MCC Card MCC User Accounts For Telnet Terminal Access to MCC Card Reboot Card MCC DSL User Accounts Reboot Card DSL MCC Snmp Community Strings and Authentication Failure Trap Checklist for Setting Up Snmp FeaturesSetting Up Snmp Features Management System Source Validation for MCC Enable/Disable Endpoint Security to 5446 RTU DSL Snmp Community Strings and Authentication Failure TrapEnable DSL Port Traps Management System Source Validation for DSL cards Download Code and Apply Download CodeScenario One Fully Operational System Apply Download Scenario Two Download Only System Navigation Keys Traps Event Trap Class Comment Traps Traps MCC card sends the following traps RTU Related Traps Standard TrapsEnterprise-Specific Traps RTU Setup Accessing 5446 RTU MIBsRTU Overview IP Injection Tool Network Management Systems MIB Browser Techniques IP Injection MIB OID Using the null entry RTU IP Configuration Table IP and Device MIBs Supported Additional pdn-common MIBs Supported ± Mask Static Route Warning Messages Message Meaning Glossary Filter EthernetEthernet Address Gateway address Multiplex MarginMCC Card Packet S1b RouterRouting Table S1c Index Numbers IN-2 IN-3