Pelco System 9760 manual Verifying System Operation, Enter Monitor #

VERIFYING SYSTEM OPERATION

After installation of the 9760 system is complete, verify system operation. To do so, perform the following from a CM9760-KBD:

1.Verify that the CM9760-KBD LCD displays the following: SYSTEM 97XX

NOTE: Depending on the version of the CM9760-KBD software, the LCD displays SYSTEM 9760 or SYSTEM 9700.

2.Enter the default operator password on the CM9760-KBD keypad: The default password for operator 1 is 0101; the default password for operator 2 is 0202; the default password for operator 3 is 0303, and so on. The passwords are defined in the Operator PIN field in CM9700-MGR.

The LCD displays the following:

ENTER MONITOR #

3.Enter the number of the monitor you are viewing—for example, 1—and then press the MON key.

4.Enter a camera number, and then press the CAM key.

5.Press the FWD key to advance through cameras and verify switching.

For detailed information about 9760 system operation using the CM9760-KBD, refer to the CM9760-KBD/KBR Keyboard Installation/Operation manual.

30 C1572M (9/05)