Note the following:

To ensure uninterrupted operation, the 9760 system can be equipped with a backup CM9700-CC1 by means of a CM9760-HS hot switch. For detailed information about the CM9760-HS, refer to the CM9760-HS Hot Switch Installation/Operation manual.

The CM9700-NW1, commonly referred to as the network interface unit (NIU), can be used to connect two or more CM9700-CC1 units to create a networked system. Each CM9700-CC1 unit and attached devices comprise a node in the network. For detailed information about the CM9700-NW1, refer to the System 9760 Networking Guide.

You can increase video output capacity of a single node from 128 to a maximum of 512 by using CM9760-MDA units. For detailed information about the CM9760-MDA, refer to the CM9760-MDA Master Distribution Amplifier Installation/Operation manual.

MODELS

The following provides a list of models of 9760 system devices and compatible equipment.

CPU CONTROLLER AND COMPONENTS

CM9700-CC1

CPU controller. Operates on 120 VAC, 60 Hz or 230 VAC, 50 Hz.

CM9700-SER

Serial communication (SERCOM) card (RS-422). Provides 8 SERCOM ports to interface peripheral equipment (4 cards

 

maximum per CM9700-CC1).

CM9700-SER-32

Port expansion unit. Provides 32 SERCOM ports. Includes interconnecting cables and adapters for DB9 and RJ-45

 

connectors. Data interface can be RS-232 or RS-422. Up to 3 units can be added to a CM9700-CC1. (Check with Pelco

 

Systems Applications Department before adding to an existing CM9700-CC1.)

MATRIX BAY AND COMPONENTS

CM9760-MXB CM9760-MXB-X CM9760-MXBL CM9760-MPS CM9760-MPS-X CM9760-RPC CM9760-RPL CM9760-DFC CM9760-DFL CM9760-VCC

CM9760-RPM

CM9760-VMC4 CM9760-VMC8 CM9760-VMC12 CM9760-VMC16 CM9760-VMM

Video matrix bay equipped with CM9760-MPS power supply. Operates on 120 VAC, 60 Hz.

Same as CM9760-MXB except operates on 230 VAC, 50 Hz.

Video matrix bay for use with CM9760-DFL downframe looping cards. No power required.

Matrix bay power supply (spare). Operates on 120 VAC, 60 Hz.

Matrix bay power supply (spare). Operates on 230 VAC, 50 Hz.

Rear panel input card. Provides 16 BNC connectors to connect video inputs to matrix bay.

Double-wide rear panel card for single-bay looping. Reduces maximum number of inputs to 128.

Downframe rear panel card and cable assembly. Connects multiple matrix bays for expansion purposes.

Downframe rear panel card and cable assembly with BNC connectors for looping video.

Video input card capable of accepting up to 16 video inputs. Also requires a rear panel card (CM9760-DFC, CM9760-DFL, or CM9760-RPC, or CM9760-RPL).

Rear panel output card. Provides 16 BNCs to connect video outputs to matrix bay. Also interfaces video output signals from CM9760-VMC4, CM9760-VMC8, CM9760-VMC12, or CM9760-VMC16 video output card.

Video output card providing 4 video outputs. Requires CM9760-RPM.

Video output card providing 8 video outputs. Requires CM9760-RPM.

Video output card providing 12 video outputs. Requires CM9760-RPM.

Video output card providing 16 video outputs. Requires CM9760-RPM.

Video output module. Expands outputs of CM9760-VMC4, CM9760-VMC8, and CM9760-VMC12 video output cards.

KEYBOARDS

CM9760-KBD*

Full-function desktop variable-speed keyboard. Operates on 120 VAC, 60 Hz.

CM9760-KBD-X*

Same as CM9760-KBD except operates on 230 VAC, 50 Hz.

CM9760-KBR*

Full-function 19-inch EIA rack mount keyboard. Operates on 120 VAC, 60 Hz.

CM9760-KBR-X*

Same as CM9760-KBR except operates on 230 VAC, 50 Hz.

KBD300A

Desktop keyboard with full switching capabilities plus joystick control of PTZ functions. Operates on 12 VAC or

 

±12 VDC. (Requires KBDKIT for power.)

KBD200A

Desktop keyboard with full switching capabilities plus push-button control of PTZ functions. Operates on 12 VAC or

 

±12 VDC. (Requires KBDKIT for power.)

*Software version 8.03 or higher is required.

10

C1572M (9/05)

Page 10
Image 10
Pelco System 9760 manual Models, CPU Controller and Components, Matrix BAY and Components, Keyboards