REPLACING A POWER SUPPLY FUSE
The rear of the matrix bay provides a separate power input receptacle for each power supply. Each power input receptacle is equipped with a fuse holder (refer to Figure 33). Each fuse holder provides a spare fuse to be used when replacing a blown fuse.
WARNING: Failure to replace a fuse with a fuse of the same rating can result in serious damage to the matrix bay. To replace the fuse in a power supply, do the following:
1.Remove the power cord from the power input receptacle.
2.Using a small screwdriver, pry the fuse holder out of the socket. The fuse holder comes out of the unit.
3.Replace the fuse with a fuse of the same rating. If using the spare fuse, be sure to replace it with a fuse of the same rating.
4.Install the fuse holder back into the socket.
5.Plug the power cord into the power input receptacle.
STORAGE DRAWER
FOR SPARE FUSE
FUSE
HOLDER
Figure 33. CM9760-MXB Power Supply Fuse Replacement
C1572M (9/05) | 55 |
