Pelco System 9760 manual Using a Combination of Sideframing and Downframing, 481 257 241

USING A COMBINATION OF SIDEFRAMING AND DOWNFRAMING

When expanding video inputs beyond 256 and video outputs beyond 16, a combination of sideframing and downframing must be used. Sideframing allows video inputs to be expanded beyond 256. Downframing allows video outputs to be expanded beyond 16. The maximum capacity of a single-node system is 2,048 video inputs and 128 video outputs.

NOTE: When using CM9760-MDA units, you can increase the video output capacity to a maximum of 512.

As viewed from the rear of the matrix bays, Figure 58 illustrates a matrix bay configuration containing sideframed and downframed bays that provide 496 video inputs and 32 video outputs. The configuration consists of a total of four matrix bays.

16 1

		481	257	241	1
BAY 3
OUTPUT BAY	Alarm Black		Alarm	Black
	Out			Out
	RS-422		RS-422
	RS-422	CAMS	RS-422		CAMS
		257-496			1-256

BAY 1

CM9760-MXB

32 17

BAY 4
OUTPUT BAY	Alarm Black
	Out
	RS-422
	RS-422

CM9760-MXB

Alarm	Black
	Out

RS-422

RS-422

SUPPLIED DOWN- FRAMING CABLES 16X RIBBON COAXIAL

BAY 2

CM9760-MXB CM9760-MXB

Figure 58. CM9760-MXB Sideframing and Downframing Example: 496 Video Inputs and 32 Video Outputs (496 x 32)

In a new system installation, multiple matrix bays are labeled to identify the location of sideframed and downframed bays in the installation, for example, labels 2A, 12A, 22A, and so on for sideframed bays and labels 2A, 2B, 2C, and so on for downframed bays. Figure 58 illustrates a four- bay configuration using a combination of sideframing and downframing:

•Bay 12A is sideframed to bay 2A, increasing the number of available inputs from 256 to 496. Bay 12B is sideframed to bay 2B.

•Bay 2A is downframed to bay 2B. Bay 12A is downframed to bay 12B, increasing the number of available outputs from 16 to 32.

For additional examples of configurations using a combination of sideframing and downframing, refer to Appendix B.

C1572M (9/05) 107