Plasmon V15 AIT Tape Library User Manual
Page 102
Packing the Library
Use the original packing materials to pack the library (shipping containers, packing pieces, and antistatic
bag). You will also need packing tape.
CAUTION
To avoid damaging the library and voiding your warranty, be sure to
use the original shipping materials (or replacement materials obtained
from your vendor) when repacking and shipping the library. Do not
include items other than the library in the shipping carton.
To pack the library:
1. Secure the robot in the robot packing piece, as follows:
a. Remove the magazine from the library.
b. Place the robot’s packing material inside the magazine so it is centered vertically
and horizontally, as shown in the following figure.
c. Place the magazine back in the library, and close the library door.
ESCAPE
ESCAPE
UNLOCK
DOOR
UNLOCK
DOOR
STATUS
STATUS
ENTER
ENTER
MENU
MENU
RESET
RESET
Robot packing material