LCD | Description | Corrective Action | |
Code |
|
| |
41 | W axis failed home. The | Open the door and remove the magazines. Look for any- | |
| library could not move the | thing that might be obstructing the wrist axis rotation. | |
| robot to the home position on | Make sure the library and tape drives are not being used | |
| the wrist axis. | by any host, then reset the library from the operator | |
|
| panel. | |
42 | Wrist front sensor failed. | ||
If the error persists, contact your service provider. | |||
| The library could not deter- | ||
|
| ||
| mine the position of the robot |
| |
| on the wrist axis. |
| |
|
|
| |
43 | Wrist back sensor failed. |
| |
| The library could not deter- |
| |
| mine the position of the robot |
| |
| on the wrist axis. |
| |
|
|
| |
60 | No label. The barcode scan- | This error appears on the Label Information screen. | |
| ner could not read the barcode | If the cartridge has a label, reposition or replace it. | |
| label because there was no | If the label does not contain a checksum character, | |
| label on the cartridge or the | make sure the Verify Barcode Checksums option is off. | |
| label was unreadable. | If the error persists, contact your service provider. | |
|
|
| |
62 | Not present. The barcode | This error appears on the Label Information screen. | |
| scanner could not read the | If necessary, install a magazine or tape drive. | |
| barcode label because the |
| |
| designated element is not |
| |
| present. |
| |
|
|
| |
64 | Bad label checksum. The | This error appears on the Label Information screen. | |
| barcode scanner could not | If the label does not contain a checksum character, | |
| read the label because of a | make sure the Verify Barcode Checksums option is off. | |
| problem with the checksum | Check the label for damage and replace the label if nec- | |
| character. | essary. | |
|
| Make sure the library and tape drives are not being used | |
|
| by any host, then reset the library from the operator | |
|
| panel. | |
|
| If the error persists, contact your service provider. | |
|
|
| |
70 | Mbus failed. The robot com- | Make sure the library and tape drives are not being used | |
| mand processor experienced | by any host, then reset the library from the operator | |
| an error. | panel. | |
|
| If the error persists, the robot may need to be replaced. | |
|
| Contact your service provider. | |
|
|
| |
72 | Front door is open. The front | Close and lock the door. | |
| door was open at an invalid | Reset the library from the operator panel. | |
| time; or the door sensor is | If the error persists, the solenoid or door sensor may | |
| malfunctioning. | need to be replaced. Contact your service provider. | |
|
|
|
Plasmon V15 AIT Tape Library User Manual Page 124
