Viewing the Ethernet Security Screens

The Ethernet security screens allow you to view the read-only values for the following community access strings: Read, Write, and Broadcast. Community strings provide security for Simple Network Management Protocol (SNMP) communication. Ethernet security also contains information about the user name and password for the secure transfer of library and Ethernet firmware upgrades via File Transfer Protocol (FTP).

NOTE

You can change these values in the Library Monitor software shipped with the library (see the Help file shipped with the software) or by using the library’s console interface (see the Diagnostics and Firmware chapter for more information about accessing the console interface).

To view the Ethernet security screens:

1.From the operator panel keypad, press [MENU] to display the menus. Press the down arrow key until “Ethernet Menu” is displayed on the screen.

 

E t

h e r

n e t

M e n u

S

2 0 5 . 1 6 1 .

8 . 9

 

 

 

 

 

2. Press [ENTER]. The Ethernet Configuration Menu displays, as shown below.

E t h e r n e t

C o n f i g u r a t i o n

3. Press the down arrow until “Ethernet Security” displays.

E t h e r n e t

S e c u r i t y

4.Press [ENTER]. The first screen to appear is shown below.

„R e a d :

P u b l i c

Plasmon V15 AIT Tape Library User Manual Page 52

Page 54
Image 54
Plasmon V15 manual Viewing the Ethernet Security Screens