Replacing Cartridges and the Magazine

This section describes how to replace cartridges and the magazine by opening the front door.

NOTE

When you open and re-close the door, the library performs the cartridge inventory process.

Opening the Front Door

1.If the security option has been enabled, disable it.

2.On the operator panel’s keypad, press the [UNLOCK DOOR] button. At the Unlock Door prompt, press [ENTER].

3.Wait while the library moves the robot to the park position (between the fixed slots and the tape drive).

NOTE

Do not force the front door open. Forcing the door could prevent the interlock mechanism from releasing by security or through the application software.

4. Pull open the door as shown in the following figure.

Door

Figure 22. Opening the Front Door

Plasmon V15 AIT Tape Library User Manual Page 56

Page 58
Image 58
Plasmon V15 manual Replacing Cartridges and the Magazine, Opening the Front Door