Tape

Cleaning

Replace

 

 

 

 

 

 

 

Motion

 

Request

 

 

Tape

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 27. AIT-3 Tape Drive Status Indicators

The following table describes some of the AIT-3 tape drive LED states. For a complete listing of LED states, contact Sony. To read the LEDs you must open the library door and remove the magazine in front of the drive.

Table 15. AIT-3 Tape Drive Staus Light Conditions

LED States

Condition

Tape Motion (left) LED on

Tape is loaded.

 

 

Tape Motion (left) LED flashing

SCSI activity is occurring.

 

 

Cleaning Request (middle) LED on

Cleaning is required.

 

 

Cleaning Request (middle) LED flashing

Cleaning activity is occurring.

 

 

Replace Tape LED (right) on.

Media error.

 

 

All LEDs flashing.

Hardware error.

 

 

Tape Drive Operation Page 77

Page 79
Image 79
Plasmon V15 manual AIT-3 Tape Drive Status Indicators