Plasmon V15 manual Monitoring the Ethernet LEDs

To connect the Ethernet cable:

1.Insert one end of the cable into the Ethernet port until you hear it snap into place.

2.Connect the other end of the cable to the server where you plan to install the Library Monitor software.

Monitoring the Ethernet LEDs

The Ethernet light-emitting diodes (LEDs) indicate the operating status of the Ethernet connection. The two LEDs are located above the Ethernet port, as shown below.

Link LED Activity LED

Figure 21. Ethernet LEDs

The Link LED turns on when a link to the network has been established. The Activity LED blinks when data transmission or reception is taking place.

Plasmon V15 AIT Tape Library User Manual Page 54