Powerware 650825 kVA operation manual Converter Fuse Battery Contactor K2

UNDERSTANDING UPS OPERATION

AC Input to	Battery Aux	Building Alarms
UPS Rectifier
3 Wire A−B−C	48V Battery	Alarm Relays
Rotation	Shunt Trip
		X−Slot
A	Remote EPO	Interface

E1, E2, E3

Interface Board

Input Breaker

(CB1)

(optional)

Input	Input	Input
Contactor	Contactor	Contactor
(K1)	(K1)	(K1)
Rectifier	Rectifier	Rectifier
Fuse	Fuse	Fuse
Fuse	Fuse	Fuse
Fuse	Fuse	Fuse
Inverter	Inverter	Inverter
Output	Output	Output
Contactor	Contactor	Contactor
(K3)	(K3)	(K3)
				AC Output to
			E9, E10,	Critical Load
				D
Battery	Battery	Battery	E11, E12
Converter	Converter	Converter
Fuse	Fuse	Fuse
Battery Contactor (K2)	Battery Contactor (K2)	Battery Contactor (K2)
			UPS
UPM 1	UPM 2	UPM 3	CABINET
E4. E5	E4. E5	E4. E5
C	C	C
Battery	Battery	Battery
Breaker	Breaker	Breaker
BATTERY SYSTEM	BATTERY SYSTEM	BATTERY SYSTEM
(Not supplied with the UPS)	(Not supplied with the UPS)	(Not supplied with the UPS)

NOTE Callout letters A, B, C, and D map to Table 3-5on page 3−10.

Service Connector

NOTE If the load requires a neutral, a bypass source neutral must be provided. If the load does not require a neutral and there is no neutral conductor connected at the bypass input, a neutral to ground bonding jumper must be installed. DO NOT install both a source neutral and a bonding jumper.

Figure 6-10. UPS System – Common Rectifier Feed, Separate Battery, IOM Configuration

EATON Powerware® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com 6−13