Powerware 650825 kVA operation manual Advanced Battery Management, Power Management Software

INTRODUCTION

SAlarm Contact – One alarm contact is provided for connection to equipment at the facility, such as a light, an audible alarm, or a computer terminal. The equipment connected to this contact alerts you to a UPS alarm. See Chapter 8,

SX−Slot Communication Bays – Four communication bays are standard equipment. One to four optional X−Slot® connectivity cards can be installed in the UPS module at any time. X−Slot cards are quickly installed at the front of the UPS and are hot−pluggable. See Chapter 8,

FI−UPM

ISBM SECTION UPM SECTION

Figure 1-2. Powerware 9395 UPS (650–825 kVA) with the Field Installed UPM

1.1.4Advanced Battery Management

A three−stage charging system increases battery service life by optimizing recharge time, and protects batteries from damage due to high current charging and inverter ripple currents. Charging at high currents can overheat and damage batteries.

1.1.5Power Management Software

Powerware LanSafe® Power Management Software is bundled as part of the Software Suite CD shipped with the UPS. See Chapter 8,

additional information.

EATON Powerware® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com 1−3