Powerware 650825 kVA operation manual Typical System Status Messages, Command Menu Operation

UPS OPERATING INSTRUCTIONS

Table 7-4. Typical System Status Messages

Function	Message
UPS	Shutdown; Bypass; Online
Bypass	Off; On; Available
Maintenance Bypass	Off; On
Charger	Charger Off; Charging
UPM (during startup)	DC Starting, Charger Off; DC Starting, Close Battery Breaker;
	Inverter Starting; Inverter Syncing; Ready; Online
UPM 1	Offline; Shutdown, Charger Off; Ready; Ready, Charging;
UPM 2	Online, Charger Off; Online, Charging
UPM 3
UPM 4 (Only Plus 1 model)

Table 7-5. Command Menu Operation

Function	Subfunction	Operation
UPS Control Commands		Use the up or down arrow pushbutton to highlight the command function desired, then press the
		SELECT pushbutton to execute the command or proceed to further command screens.
	Go to Normal	Starts the UPS in Normal mode or transfers the UPS to Normal mode from Bypass mode.
	Go to Bypass	Starts the UPS in Bypass mode or transfers the UPS to Bypass mode from Normal mode.
	Load Off	Displays the Load Off screen (see paragraph 7.2.8).
Bypass Commands		Use the up or down arrow pushbutton to highlight the command function desired, then press the
		SELECT pushbutton to execute the command or proceed to further command screens.
	Go to Bypass	Starts the UPS in Bypass mode or transfers the UPS to Bypass mode from Normal mode.
	Go to Normal	Starts the UPS in Normal mode or transfers the UPS to Normal mode from Bypass mode.
	Load Off	Displays the Load Off screen (see paragraph 7.2.8).
Charger Control		Use the up or down arrow pushbutton to highlight the command function desired, then press the
Commands		SELECT pushbutton to execute the command.
	Charger On	Turns the battery charger on.
	Charger Off	Turns the battery charger off
UPM Control		Use the up or down arrow pushbutton to highlight the command function desired, then press the
Commands		CONTROLS pushbutton to execute the command.
	UPM On	Turns the UPM on without transferring the load to Normal mode. The Load is on bypass.
	UPM Off	Transfers the load to bypass and turns the UPM off.
	UPM Go to Normal	Turns the UPM on and transfers the load to Normal mode.
	Charger On	Turns the battery charger on.
	Charger Off	Turns the battery charger off

EATON Powerware® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com 7−9