Powerware 650825 kVA operation manual Using the Control Panel, Circuit Breaker

UPS OPERATING INSTRUCTIONS

7.1.1Control Panel

The control panel is used to set up and control the UPS, and to monitor UPS operation. For a description of the UPS control panel functions, see paragraph 7.2.

7.1.2Circuit Breaker

Optional circuit breaker (CB1) is used to control the AC input to the UPS rectifier.

NOTE CB1 is supplied with an extension handle to assist in operating the breaker. This handle can not be installed permanently and must be removed for the front door to close. Self−stick hook and loop fastener strips are provided tied to the handle for mounting the handle in a convenient location (such as next to the breaker on the bottom internal safety shield panel) when not in use. Remove the backing from each strip and attach one strip to the handle and the other strip to any smooth surface.

7.2Using the Control Panel

The following paragraphs describe the UPS control panel, including controls and indicators, and how to monitor UPS operation. The control panel (see Figure 7-2)is located on the front door of the UPS.

3

PRESS ANY KEY TO CONTINUE

2

1

Figure 7-2. UPS Control Panel

The control panel consists of:

SA liquid crystal display (LCD) (1)

SA horizontal row of pushbutton switches (2)

SA vertical column of status indicators (3). See paragraph 7.2.1.

The following paragraphs describe using the UPS control panel to monitor the UPS. See paragraph 7.3 for use of the operational controls.

When the UPS powers up, the screen displays the Eaton Powerware logo as shown in Figure 7-2.To advance to the Main Menu and Mimic screen, press any control panel pushbutton once.

7−2 EATON Powerware® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com