Front tab
der
Spr
Hea
Figure 7-1. Replacing the print head
6.Disengagethe cable from the connectorholdingit down,then remove the print head.
7.Plug the cableinto the connectorof the new print head.
8.Placethe new printhead on its support,seatingit on the two pins.
9.Fasten the printhead down with the two screws. 10.Remountthecolorribbonholderwithcareto positionthe springandthe
fronttab correctly. 11.Replacetheribboncartridgeandtopcover,andplugthepowercordback
in.
114
