Ifthepaperparkfttnctiondoesnotappeartobe workingcorrectly,checkthe following:
ICheck
Is the paper release lever in the ~ position?
Has the fanfold paper been properly parked?
\ Possible remedy | I |
The papsr release lever must be set to the ~ | position |
after the fanfold paper has been parked. |
|
Make sure that the POWER indicator comes on flashing after the fanfold paper has been parked.
If text is being printed all on one line, or with extrablank lines, checkthe following:
Check
Is the text all on the same tie?
Is text being printed with extra blank lines?
Possible remedy
Carriage returns are not being expanded to <CR> + cLF> pairs. Check the EDS setting and correct.
Two line feeds are being printed. Make your software print just acarriageretum or(if this is notpossible), set the AUTO LF to OFF with the EDS setting.
If thepagelengthandmarginsarenotwhatis expected,checkthefollowing:
w Use the EDS switches tosetup thecorrectpage length, or use softwarecommands to do it.
I Check | Possible remedy |
| Use the Micro Feed function to adjust the print position |
| relative to the page. |
