Tektronix AWG710, AWG710B Save the Waveform

Tutori als
2-60 AWG710&AWG710B Arbitrary Waveform Generator User Manual
6. Select Mul item using the general purpose knob.
7. Push the b button once to select the Cycle field.
8. Use the general purpose knob to set the number of cycles to 20.0.
9. Push the b button twice to select the Amplitude field.
10. Use the general purpose knob to set the amplitude to 1.0.
11. Push the OK side button to perform the multiply operati on . This action
multiplies the sine wave in the waveform editor by the sine wave you have
specified in the Standard Function dialog box. Figure 2-38 sho ws the resulti ng
waveform.
Figure 2-38: Waveform created with the multiply operation
Save the Waveform Do the following steps to save the wavefo rm:
1. Push the File bottom button.
The File pop–up menu appears.
2. Select Save from the pop–up menu using the general purpose knob.
NOTE. To output the waveform in the waveform editor, you must first save the
waveform into a file and then load the file in to the waveform memory.