Getting Started
1-16 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Repackaging for Shipment
If this instrument is shipped by comm e rcial transportation, use the origi nal
packaging material. If the original packaging is unfit for use or is not available,
repackage the instrument as follows:
1. Obtain a corrugated cardboard shipping carton having inside dimensions at
least 3 inches greater than the instrument dimensions and having a carton test
strength of at least 125 kg (275 lb.).
2. If the instrument is being shipped to a Tektronix Service Center for repair or
calibration, attach a tag to the instrument showing the following information:
The owner of the instrument (with addr es s).
The name of a person at your firm who may be contacted if additional
information is needed.
The complete instrument type and serial number.
A description of the service require d.
3. Wrap the instrument with polyethylene sheeting or equivalent to protect the
outside finish and prevent entry of packing materials into the instrument.
4. Cushion the instrument on all sides by tightly packing dunnage or urethane
foam between the carton and the instrument, allowing for 7.62 cm (3 in) of
padding on each side (including top and bottom).
5. Seal the carton with shipping tape or with an industrial stapler.
6. Mark the address of the Tektronix Service Center and your return address on
the carton in one or more prominen t lo cations.
NOTE. Do not ship the ins trument with a diskette ins ide the floppy disk drive . When
a diskette is inside the drive, the disk release button sticks out. This makes the
button susceptible to damage.