The Graphical Waveform Editor
3-70 AWG710&AWG710B Arbitrary Waveform Generator User Manual
The Import Pattern function lets you read waveform or pattern data from the
specified target data type of the active window and stores it in the pattern buffer.
You can then replace waveform or marker data wi th the pattern data in the current
window or another window. The Set Pattern dialog box con v erts all wa ve form data
greater than 0.5 volts to a one level if the wa vefo rm data is anal og T . All wav eform
data less than or equal to 0.5 volts is set to a zero level.
Do the following steps to use the Import P attern function t o con ve rt wa vefo rm data
into pattern data:
1. Move the cursors to specify the edit area from which to import the waveform
pattern data.
2. Push Operation (bottom)!Set Pattern... (pop–up)!OK (side).
The Set Pattern dialog box appears.
3. Select Data, Marker1, or Marker2 to specify the data type from which to
import the pattern data.
4. Push the Import Pattern side button to import the pattern data.
All waveform data above 0.5 becomes a one pattern value, and all waveform
data at or below 0.5 becomes a zero pattern value. The pat tern data is s tored in
the pattern buffer.
5. Select Data, Marker1, or Marker2 to specify the data type t o replace with the
pattern data.
6. Push the OK side button to replace the waveform or marker dat a with the
specified pattern data.
Do the following steps to write pattern d ata between different editor windows:
1. Move the cursors to specify the edit area from which to import the waveform
pattern data.
2. Push Operation (bottom)!Set Pattern... (pop–up)!OK (side).
The Set Pattern dialog box appears.
3. Select Data, Marker1, or Marker2 to specify the data type from which to
import the pattern data.
4. Push the Import Pattern side button to import the pattern data.
All waveform data above 0.5 becomes a one pattern value, and all waveform
data at or below 0.5 becomes a zero pattern value. The pat tern data is s tored in
the pattern buffer.