The Graphical Waveform Editor
AWG710&AWG710B Arbitrary Waveform Generator User Manual 3-71
5. Push the Cancel side button.
This cancels the Set Pattern dialog box but retains the pattern data in the patter n
buffer.
6. Open or make active the other editor window.
7. Move the cursors to specify the edit area in which to replace the existing data
with the pattern data.
8. Push Operation (bottom)!Set Pattern... .
The Set Pattern dialog box appears, with the pattern f ield displaying the p attern
data from the other editor window.
9. Select Data, Marker1, or Marker2 to specify the target data type to replace
with the pattern data.
10. Push the OK side button to replace the waveform or marker data wi th the
specified pattern data.
Numeric Input... The Numeric Input... command lets you change the waveform or marke r data va lue
at the active cursor location. You can use the numeric buttons or th e general
purpose knob to change the waveform data value.
Do the following steps to change the numeric value of the da ta at t he active cursor
position:
1. Move a cursor to the data point that you want to change.
2. Push Operation (bottom)!Numeric Input... (pop–up)!OK (side).
3. Push the Data side button and use the general purpose knob or numeric keys
to set the waveform data value.
4. Push the Marker1 or Marker2 button to toggle between the marker values.
NOTE. The values modified through the side menu are immediately shown in the
data. Use the general purpose knob after the value ha s been modi fi ed. Push Und o!
to return to the previous value prior to modification.