Synchronous Operation Mode (AWG710B only)
3-252 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Change the generator mode
AWG mode to
Synchronous Operation
mode
The instrument initializes in the AWG mode when powered o n.
Do the following to change the generator mode from AWG to Synchronous
Operation:
1. Push SETUP (front–panel)!Extended Operation (bottom)!
Sync - Master... or Sync - Slave... (side) button.
The instrument displays the Synchronous Operation mode screen.
Synchronous Operation
mode to AWG mode
Do the following to change the generator mode from Synchronous Operation to
AWG:
1. Push Exit Sync... (bottom) button.
The instrument returns to the AWG mode.
Figure 3-87: Change the generator mode
To
Sync-Master
mode
Synchronous Operation mode Sync-Master screenAWG SETUP screen
To AW G
mode
Synchronous Operation mode Sync-Slave screen
To
Sync-Slave
mode
To AW G
mode