Tektronix AWG710, AWG710B Example 8

Programming Examples
AWG710&AWG710B Arbitrary Waveform Generator User Manual 3-215
The following text describes what happens in this example:
1. The noise() function generates a noise waveform into the file NOISE.WFM, in
which the waveform data are normalized using the norm() function.
2. The extract() function extracts the data sp through ep and st ore s t hem into the
file TEPM1.WFM.
3. The integ() function integrates the 7 data. The data of last point is the amount
of 7 point data. This last data is divided by 7 and then concatenated to the file
SMOOTH.WFM.
4. The for statement shifts the points to be read by one point for each loop and
repeats these procedures.
Figure 3-69: Noise waveforms before (upper) and after (lower) 7–point smoothing
Example 8 The following example creates two sequence files and five waveform files. These
files are the same as those used in the Tutor ial 6: Cr e ating and Runni ng Waveform
Sequences beginning on page 2-70.
' Tutorial 6
delete("MAINSEQ.SEQ")
delete("SUBSEQ.SEQ")