Appendix B: Performance Verification (AWG710)
AWG710&AWG710B Arbitrary Waveform Generator User Manual B-63
Figure B-38: Loading file; selecting storage drive
3. Select Floppy from the dialog box with the general purpose knob, and then
push the OK side button.
The Select Drive dialog box disappears, and the files in the floppy disk are
listed on the Select File dialog bo x.
4. Use the general purpose knob to select a file to be lo aded f rom the dialo g box,
and then push the OK side button.
The waveform or sequence you selected is loade d into the instrument, and the
instrument is also setup with the para meters stored in that file.
5. Remove the floppy disk from the floppy drive if the floppy disk is no longer
needed.
6. Push any bottom button or menu button to exit the menu.
NOTE. The floppy disk file list displayed on the screen does not automatically
update when you replace the diskette with another diskette. To update the file list,
reselect the floppy disk drive.