Appendix A: Specifications (AWG710B)

AWG710&AWG710B Arbitrary Waveform Generator User Manual A-25

Certification and Compliances

The certification and compliances for the AW G710B Arbitrary Waveform

Generator are listed in Table A-28.

TableA-28: Certifications and compliances

Characteristics Description
EC declaration of conformity EC council EMC Directive 89/336/EEC, amended by 89/336/EEC; EN61326-1: 1997 Product
Family Standard for Electrical Equipment for Measurement, Control, and Laboratory
Use-EMC Requirements.
Emissions:
EN 55011 Class A
EN 61000–3–2
EN 61000–3–3
Radiated and Conducted emissions
Power Line Harmonic
Line voltage alteration and flicker
Immunity:
EN50082–1
EN 61000–4–2
EN 61000–4–3
EN 61000–4–5
EN 61000–4–6
EN 61000–4–46
EN 61000–4–8
EN 61000–4–11
Electrostatic Discharge Immunity
Radiated RF Electromagnetic Field Immunity
Surge Immunity
Conducted Disturbances Induced by RF Field Immunity
Electrical Fast Transient/Burst Immunity
Power Frequency Electromagnetic
Power Line Interruption Immunity
Compliance was demonstrated to the following specification as listed in the Official Journal of
the European Communities:
Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
EN 61010–1/A2:1995 Safety requirements for electrical equipment for measurement,
control, and laboratory use
Australia/New Zealand declaration of
conformity - EMC
Conforms with the following standards in accordance with the Electromagnetic Compatibility
Framework:
AS/NZS 2064.1/2
Class A radiated and Conducted Emissions
Safety UL3111–1 - Standard for electrical measuring and test equipment
Third party certification CAN/C SA C22.2 No. 1010.1 - Safety requirements for electrical equipment for measurement,
control and laboratory use
Self declaration IEC 61010–1/A2:1995 - Safety requirements for electrical equipment for measurement,
control, and laboratory use
Installation category Power input — Installation Category II (as defined in IEC 61010–1, Annex J)