LAMINATING YOUR PHASER 600 PRINTS
251
Laminating your Phaser 600 prints
You can protect your wide format prints using commercially available,
pressure-sensitive and warm temperature (under 200˚ C) lamination media. For
best lamination performance, Tektronix offers specially formulated lamination
material designed to produce high quality, durable prints. You can use Tektronix
lamination material to laminate Phaser 600 output on any commercially available
heat/pressure laminator that meets the feature list in the following table.
Feature description Specification
Roll size 37 inches (940 mm) wide
6.8 inches (173 mm) outside diameter
Upper pressure roller temperature 195˚ F (90.5˚ C)
Lower pressure roller temperature Ambient
Laminator speed 0.65 inches (16.5 mm) per second
Nip pressure Minimum setting for best print quality
Take-up spool Requires release liner take-up spool