Tektronix Phaser 600 Exposing the fuser shuttle

OCCASIONAL CLEANING

556

Exposing the fuser shuttle

NOTE

If you have not already removed the media roll, do it now.

1To open the exit cover,

push the latch (a, on the

lower right side of the

printer)

, while

holding the exit cover

handle (b); slowly rotate the

cover down. The fuser

shuttle (c) is visible on the

far right, inside the printer.

WARNING

When lowering the exit cover, be careful not to pinch your hand between the paper

roll cover and the exit cover.

9480-118