Tektronix Phaser 600 Printing PostScript les

CHANGING THE PRINTER’S LANGUAGE MODE

524

Printing PostScript ﬁles

Use the

PSCRIPT.PS

ﬁle to change a printer’s port to accept

only

PostScript data.

After you copy this ﬁle to a port, the printer expects PostScript ﬁles on that port. The

port’s language change is persistent across print jobs and across printer power

cycles. To use, send the

PSCRIPT.PS

ﬁle to the printer.

1Locate the utility ﬁles on the Phaser 600 printer’s CD-ROM; refer to Installing

the ﬁles for instructions.

2Use one of the following methods to send the

PSCRIPT.PS

ﬁle to the printer:

■PC users: Use the DOS COPY command to send the ﬁle to the printer.

(Windows 3.1 users can also use the Copy command in the File

Manager.)

■Workstation users: Send the ﬁle to a printer as you would any

PostScript ﬁle.