Tektronix Phaser 600 Setting up the drivers for Windows 3.1 (cont'd.)

PC/WINDOWS SOFTWARE
57
4. Return to Installing printer software for
Windows to perform Step 7
and Step 8 of the installation procedure.
Then go on to Step 1 of the next
procedure, below.
5. Select your printer and click Install:
■Tektronix Phaser 600
(standard configuration)
■Tektronix Phaser 600 - Extended
(Extended Features option)
Note Press and hold down the front panel’s
button for configuration information.
6. Click OK; click Close; click OK.
Note See the Adobe PostScript Printer Driver
User Guide on the printer’s CD-ROM
( USRGUIDE.PDF ) for detailed information
on the AdobePS 3 driver.
1. In the Control Panel, double-click Printers.
2. Select the Tektronix Phaser 600 printer you installed in the above procedure;
click Connect.
3. Select the port the printer is connected to; click OK.
End
Setting up the drivers for Windows 3.1 (cont'd.)
Tektronix driver Adobe PostScript driver